Best Alternative to Apple’s “hump” Battery Case– EasyAcc MFi 3200mAh iPhone 6 Battery Case

Since the Apple “hump” battery case as well as its price are not so good looking, I need to find some alternative battery cases to charge my iPhone. And here I got an EasyAcc MFi 3200 mAh battery case which is a wonderful choice for the “hump”.

EasyAcc-MFi-3200mAh-1 

 

The EasyAcc MFi 3200mAh comes with the following:

  • EasyAcc MFI 3200mAh iPhone 6 batter case
  • Micro USB to USB cable
  • Audio jack extender
  • User manual

EasyAcc-MFi-3200mAh-2

The audio jack extender is a nice addition, while the included EarPods from Apple will work without the extender, others may not.

 

EasyAcc-MFi-3200mAh-3

The EasyAcc MFi 3200mAh has the following specifications:

  • Battery type: lithium polymer
  • Product Model: 10API6-B3
  • Capacity: 3200mAh
  • Input: 5V 1A
  • Output: 5V 1A
  • Dimensions: 6.1″ x 2.8″ x 0.6″
  • Weight: 3.5 oz

As a note here, this case is not currently listed on the EasyAcc website so the information is from their listing on Amazon, their primary seller of this case.

EasyAcc-MFi-3200mAh-4

The front of the EasyAcc MFi 3200mAh shows the case’s product information, the Lightning connector inside the front, along with two cutouts for sound.

EasyAcc-MFi-3200mAh-5

The back of the MFi 3200mAh has a cutout for the phone’s camera and flash, the EasyAcc logo, a power button and four LED power indicator lights. The button and the lights allow you to see how much charge is left in the battery. The power button is used to turn the battery on and off as well as for checking the battery level of the case. The power indicator lights are used to tell how much juice is left in the battery, each light represents 25% of the batteries charge

EasyAcc-MFi-3200mAh-6

The bottom of the EasyAcc MFi 3200mAh has a charging port for the micro USB cable to plug into and an access hole for the headphone jack. As I mentioned above, the headphones that are included with the iPhone 6 can be used through the access hole, but it would probably be a lot quicker and easier to use the included audio jack extender.

EasyAcc-MFi-3200mAh-7

The top of this cover has no distinguishing features.

 EasyAcc-MFi-3200mAh-8

The right side of the MFi 3200mAh has a silver button built-in to control the on/off switch on the iPhone 6.

EasyAcc-MFi-3200mAh-9

The left side of the cover has a cutout for the mute switch on the iPhone, and silver volume up and down buttons.

EasyAcc-MFi-3200mAh-10

Charging the case was just a matter of plugging in the supplied USB to micro USB cables in and letting it charge. A nice feature of the case is that it will allow you to charge your phone and the case at the same time. The power indicator lights will flash as they charge up and all of them will stay lit when the case is fully charged. To test the battery I let my phone run down to 17% and had the case fully charged to see how long it would take to recharge and how much of a charge I got. The results were as follows:

  • 17% to 55% = 41 minutes
  • 55% to 100% = 1hr 48 minutes
  • 17% to 100% = 2hr 29 minutes

EasyAcc-MFi-3200mAh-11

After charging the EasyAcc MFi 3200mAh, it was time to put the case on my iPhone. To put the phone in the case you simply remove the top cover and slide the iPhone 6 into the case until it seats all the way onto the Lightning connector. After the phone is seated you simply replace the top cover. If placing your phone in the case is simple, removing it can be a little challenging. That can be good for making sure your phone stays in the case, but bad if you want to remove it quickly. I have seen this issue noted in some reviews of the case, but I do not personally find it to be a big deal.

EasyAcc-MFi-3200mAh-12

Knowing a lot of folks use headphones not only for listening to music, but also for talking on the phone, I thought I should show the audio jack extension plugged into the case with headphones attached.

 

So the bottom line is, the EasyAcc MFi 3200 battery case allows you to protect your investment with the added plus of a backup power source for your phone. The fit and finish on this case is well above average and the size and weight are acceptable for what it is. 

 

发表评论

Fill in your details below or click an icon to log in:

WordPress.com 徽标

您正在使用您的 WordPress.com 账号评论。 注销 /  更改 )

Twitter picture

您正在使用您的 Twitter 账号评论。 注销 /  更改 )

Facebook photo

您正在使用您的 Facebook 账号评论。 注销 /  更改 )

Connecting to %s

%d 博主赞过: