The bump on the back of the case isn’t a deal breaker. Last month, Apple released its first battery case accessory for the iPhone 6 and iPhone 6S. Battery cases are typically bigger than protective cases due to the built-in battery pack that packs enough power to recharge your smartphone while you’re on the move. Some cases offer enough power to recharge your phone multiple times before you’re forced to find an outlet. Apple’s $99 Smart Battery Case, however, includes a 1,877 milliamp-hour battery that’s slightly bigger than that found in iPhone 6 (1,810 mAh) and 6S (1,715 mAh) according to iFixit. The case is available in black or white. In comparison, Mophie’s $99 Juice Pack Air offers a 2,750 mAh battery. Anker’s $47 case is less than half the price, and boasts a 3,100 mAh battery. In addition, EasyAcc’s $32 case provides 3,500 mAh battery and can serves more than a case. The silicone exterior and microfiber interior of the case looks and feels similar to the cases Apple AAPL 0.42% has sold for the past two years, with one exception: There’s a giant bump—or as some like to call it, “the hump”—in the middle of the case. Just don’t call it a “hump” in front of Apple CEO Tim Cook, who recently explained the design makes it easier to take the case on or off of your phone—and he has a point. To apply or remove the case, you bend back the top of the case right above the bump and slide your iPhone in or out of it. This approach is different from other battery cases that are typically made of two pieces and feel like a more permanent solution. Let’s be honest, all battery cases are ugly. They increase the size of your smartphone and add weight. Browsing Amazon listings for the iPhone 6S battery cases returns offerings from a myriad of companies, and they all look nearly identical: A plastic rounded back that spans the length of the iPhone, with a cutout for the iPhone’s camera and ports along the bottom of the device.While some may consider the bump on the back of the case an eyesore, I don’t view it as any uglier than of the competing solutions. At one point during testing, I let my iPhone completely run out of battery and then charged it using the Smart Battery Case. Without using my iPhone other than to check a couple of emails, the case charged my phone from zero to 78%, in about an hour. My tests and experience are similar to what I’ve found with other battery cases. But Apple’s Smart Battery Case offers two features that set it apart from similar products. First, it uses Apple’s proprietary Lightning connector to charge your phone and the case. By using a Lightning connector, you’re able to charge the case using the same adapter and cable that came in the box with your iPhone. Competing cases use a microUSB connector, meaning you have to carry a second cable around in order to charge your case. Second, Apple has integrated the case directly into the iPhone’s operating system, iOS. Through software enhancements, Apple is able to display the current battery status of the case and your iPhone in iOS 9’s new battery widget (found in the Today panel of the notification center), and on the lock screen when you first put your phone into the case. My biggest complaint about the case is the 3.5 mm headphone port is too deep for headphones with 90-degree angle connectors. Apple’s EarPods included with each iPhone work just fine with the case, but should you want to use anything else you’ll either need to remove the case or purchase a 3.5 mm extender. The two cases referenced above from Mophie and Anker both suffer from the same problem, but include an extender when you purchase a case. Apple’s Smart Battery Case includes no such accessory. For those who often need to recharge an iPhone multiple times while traveling or over the weekend, the Smart Battery Case probably isn’t best for you. For those who need just a little more juice to get through a long travel day, the Smart Battery Case will get the job done.